LumberJocks

Moravian Workbench Build #1: Getting Started

  • Advertise with us
Blog entry by ElroyD posted 03-15-2018 05:06 PM 480 reads 0 times favorited 4 comments Add to Favorites Watch
no previous part Part 1 of Moravian Workbench Build series no next part

A couple of years ago I started to get more into studying 18th and 19th century hand tool woodworking. At the time, I didn’t have a shop, and didn’t have anyplace to put one. During the summer I put cleaned out a section of our goat barn, put up a couple of sawhorses with a solid-core door on top to use as a workbench, and began to play.

Then daughter #5 came along.

Needless to say, babies take up a lot of time, so things were put on hold. Now that she’s a little more capable of entertaining herself, I’m back at it. Unfortunately my barn workshop filled up with stuff again, and the temperature outside is currently about 30 degrees. We’re also on our 3rd Nor’easter of the month, so the snow is a bit deep.

Not to be stopped, though, I began working on the first tool that I really need for my workshop. A good bench. I took over a small 4’ x 5’ section of our laundry room where I can work on the floor preparing stock, at least until it warms up enough to work outside again.

I’ve decided on the Moravian style portable workbench. I really like the design, and the portable aspect appeals to me. As a reenactor of the American Revolutionary War, I also like that it can be documented to the 18th century (outside of New England, unfortunately).

So, over the past few weeks, I’ve been stealing 5 or 10 minutes out of each day to work on gluing up and dimensioning the legs for my bench. Being a Stay at Home Dad, I don’t have much of an income, so pieces are being made from whatever lumber I can find stashed in various places on the property (two barns and a basement that have been filling up with my father-in-law’s “That might be useful someday” collection).

It didn’t take long for my kids to figure out where I’ve been hiding. A few of my daughters have tried their hand at planing. The nice thing about hand tools is that I don’t need to worry as much about them lopping off an arm. My four year-old really enjoyed it. I think I might let her help with mortising when the time comes. She loves anything that she can whack with a mallet.

IMG_20180315_104638203IMG_20180310_103914953IMG_20180315_104630643IMG_20180315_104736944IMG_20180315_104625912

-- Elroy



4 comments so far

View Ron Aylor's profile (online now)

Ron Aylor

2494 posts in 610 days


#1 posted 03-15-2018 05:30 PM

Good luck with your bench, Elroy … I’ll be following along. Hope you can keep your little helpers busy … LOL!

-- Ron in Lilburn, Georgia.  Knowing how to use a tool is more important than the tool in and of itself.

View ElroyD's profile

ElroyD

67 posts in 551 days


#2 posted 03-15-2018 05:46 PM

For some reason my comments on the photos didn’t come through. My four year-old (the one with the bright blue eyes) did a pretty good job of planing on her own. While taking off small curls she said “This is actually kinda fun.” Then later she looked at her sister and “Girls can do anything that boys can.” :-)

-- Elroy

View Ron Aylor's profile (online now)

Ron Aylor

2494 posts in 610 days


#3 posted 03-15-2018 06:48 PM

Looks like you have a few future woodworkers there, Elroy. Teach ‘em while they’re young … good for you!

-- Ron in Lilburn, Georgia.  Knowing how to use a tool is more important than the tool in and of itself.

View Notw's profile (online now)

Notw

633 posts in 1716 days


#4 posted 03-15-2018 07:15 PM

I would also say their knees and backs are able to get down and do the planing a lot easier. Look forward to seeing this come together

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com