LumberJocks

Updating My Tool Box Functionality

  • Advertise with us
Blog entry by SirFatty posted 08-04-2018 05:48 PM 548 reads 0 times favorited 2 comments Add to Favorites Watch

I purchased a Workmate Dropleaf (#79-021) at a fleamarket three years ago, I thought it was pretty cool, but did not have an immediate need for it. Until now…

Since I no longer have a large bench to work on (which is why I made the collapsible bench, details here), I’m always thinking of ways to work more efficiently. To that end, I decided to mount the above mentioned workmate to the side of my mobile toolbox.

Purchased some “diamond plate” laminated particle board at Menards and wrapped it with some scrap maple I had in the scrap pile.

There are holes on the side of this toolbox to mount other accessories (drawers, etc), which work perfect for what I am doing here. Pre-drilled all the necessary holes, countersunk where needed.

Attached using metric hardware.

Next, I clamped a piece of pine to the workmate so I could make sure it was even with the top of the bench, and marked where the mounting holes would be located.

Countersunk for the bolt heads and mounted the workmate.

I tested it out by making a base for my Ryobi miter saw, using the scraps from this project, but wrapped in oak instead of maple.

Maybe someone will find this useful, but I know the workmate is pretty rare, so who know.

Thanks for looking!

-- Visit my blog at dave.spalla.com



2 comments so far

View FirehouseWoodworking's profile

FirehouseWoodworking

722 posts in 3474 days


#1 posted 08-04-2018 06:16 PM

BRILLIANT!! You have just given me the revelation for where I am going to mount my little Workmate! I have been coming up with ideas and rejecting them for years now. Now I have a solid plan!

WELL DONE!

Cheers!

-- Dave; Lansing, Kansas

View Joe Lyddon's profile

Joe Lyddon

10323 posts in 4254 days


#2 posted 08-04-2018 09:02 PM

COOL way to get more from an OLD tool…

Great job!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com