LumberJocks

Three-Piece Table Set & Ammunition Box

  • Advertise with us
Project by sheetzy posted 08-04-2016 08:30 PM 1309 views 3 times favorited 9 comments Add to Favorites Watch

After the purchase of my most recent handgun, I thought it would be nice to have somewhere to sit and clean it, so I decided to make a table. The finished product is made out of white pine and is 44 inches wide by 32 inches deep by 30 inches high. I put six 12-inch by 12-inch ceramic tiles in the top of the table to use as my working surface. Those tiles match the floor, since they were left over from when I converted my basement into a family/rec room. Then I made two smaller matching end tables. Those are 18 inches square by 22 inches high and have one tile in the middle. All three tables have a bottom shelf for extra storage. I also made the ammunition box that’s on top of the large table. It’s made out of pine and is hand-dovetailed.

-- What this world needs is a little more sawdust on the floor.





9 comments so far

View ralbuck's profile

ralbuck

5378 posts in 2463 days


#1 posted 08-04-2016 09:42 PM

A bang up job!

-- Wood rescue is good for the environment and me! just rjR

View BurlyBob's profile

BurlyBob

5969 posts in 2462 days


#2 posted 08-04-2016 11:32 PM

That’s a really great looking set there.

View MadMark's profile

MadMark

979 posts in 1649 days


#3 posted 08-05-2016 12:06 AM

Umm, the 1/4” bottom is what needs cross supports, not the top. Fill with ammo and the top & sides will leave the lead on the bottom when you lift. Esp if the bottom glue is weak.

M

-- Madmark - Madmark2150@yahoo.com Wiretreefarm.com

View sheetzy's profile

sheetzy

167 posts in 2355 days


#4 posted 08-05-2016 01:39 PM

hey mark, you only see 3/8” on bottom, there is another 1/2” rabitted up inside you don’t see. but thanks for the observation. sheetzy

-- What this world needs is a little more sawdust on the floor.

View GR8HUNTER's profile

GR8HUNTER

5091 posts in 909 days


#5 posted 08-05-2016 02:07 PM

very nice set of tables ….... like the inset of matching floor tiles …...... like the ammo box also …........GREAT JOB

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Monte Pittman's profile

Monte Pittman

30047 posts in 2534 days


#6 posted 08-05-2016 02:08 PM

Very nice work

-- Nature created it, I just assemble it.

View helluvawreck's profile

helluvawreck

32087 posts in 3063 days


#7 posted 08-05-2016 03:28 PM

That is a very attractive table set. Nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View ClammyBallz's profile

ClammyBallz

449 posts in 1333 days


#8 posted 08-05-2016 08:37 PM

That’s too nice of a table to dirty up with gun oil & cleaner. Get yourself a cleaning mat.

View jerkylips's profile

jerkylips

462 posts in 2767 days


#9 posted 08-09-2016 02:27 PM

You forgot an important detail! What kind of handgun did you buy?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com