LumberJocks

Ebony and Brass-scaled knife

  • Advertise with us
Project by PPK posted 09-18-2017 05:09 PM 797 views 0 times favorited 14 comments Add to Favorites Watch

I’m participating in the 2017 knife swap, and really got into it, I guess. I decided to make this knife as a practice knife (my second ever knife) I will give it to my wife as a surprise. The scales are ebony, which I also bought on Ebay.

I purchased the blade blank on Ebay: it’s preshaped, presharpened, prehardened… you get the point. I didn’t touch the blade. I did however do all the work on the handle. See pics below of the building. It was fun to build, and I think it’ll be a good user. I’m hoping to get a lot of peeled potatoes and potato pancakes outa this thing!!

.
.
.
Preparing the brass bolsters, and drilling an additional hole for the brass:

Preparing the brass by sanding the edges I can’t easily sand before soldering:

.
Soldering the bolsters on with the brass pin:

.
Attaching the wood scales with epoxy, and then rough shaping:

.
Final sanding, and then buffing the brass and cleaning up the blade:

.
Finished product: I’ll wipe on some oil wax to protect the handle and make it a bit more black and shiny….

-- Pete





14 comments so far

View builtinbkyn's profile

builtinbkyn

1921 posts in 775 days


#1 posted 09-18-2017 05:41 PM

Pete that came out great. Nice work on the bolster and scales.

-- Bill, Yo!......in Brooklyn & Steel City :)

View pottz's profile

pottz

2218 posts in 818 days


#2 posted 09-18-2017 06:09 PM

hey for your second knife i think you did a beautiful job on it,wife should love it.id say whoever gets the kinife for the swap is gonna be happy too.great job pete.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View helluvawreck's profile

helluvawreck

29121 posts in 2701 days


#3 posted 09-18-2017 06:15 PM

This knife turned out beautifully.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View XrayJay's profile

XrayJay

230 posts in 1813 days


#4 posted 09-18-2017 06:45 PM

That thing looks sharp! Sorry that was bad. You did a great job with the knife though. Not too big or small, perfect handy knife.

-- Whatever you find to do with your hands, do it with all your might,... because there is no work in the grave...Ecclesiastes 9:10

View PPK's profile

PPK

867 posts in 643 days


#5 posted 09-18-2017 09:53 PM

Thanks all!

-- Pete

View waho6o9's profile

waho6o9

8026 posts in 2411 days


#6 posted 09-19-2017 04:00 AM

Beautiful work Pete!

View HokieKen's profile

HokieKen

4510 posts in 973 days


#7 posted 09-19-2017 11:24 AM

Well done Pete!

-- Kenny, SW VA, Go Hokies!!!

View Dave Polaschek's profile

Dave Polaschek

1185 posts in 416 days


#8 posted 09-19-2017 12:28 PM

Nicely done, Pete! Making the brass bolster out of bar stock makes you kind of a metalworker. ;-)

-- Dave - Minneapolis

View doubleG469's profile

doubleG469

397 posts in 279 days


#9 posted 09-19-2017 12:41 PM

Love it Pete great job! Do you need my address?

-- Gary, Texas "That’s just my $.02 and I have no personal experience so take it with a grain of salt ;-P, HokieKen"

View PPK's profile

PPK

867 posts in 643 days


#10 posted 09-19-2017 01:25 PM



Love it Pete great job! Do you need my address?

- doubleG469

nah, it’d cost too much to ship internationally :-P

-- Pete

View jeffswildwood's profile (online now)

jeffswildwood

2558 posts in 1811 days


#11 posted 09-19-2017 01:25 PM

Really nice knife! If this is practice I bet the swap knife will be beautiful! Super job!

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View bobasaurus's profile

bobasaurus

3352 posts in 3018 days


#12 posted 09-19-2017 05:36 PM

That’s a great-looking knife. How did you go about soldering the bolsters? Is there a special solder for brass?

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View PPK's profile

PPK

867 posts in 643 days


#13 posted 09-19-2017 05:45 PM



That s a great-looking knife. How did you go about soldering the bolsters? Is there a special solder for brass?

- bobasaurus

Just plain old plumbing solder that I use for copper pipes. I don’t know if there’s a special kind for brass. It seems quite strong. I think that its quite compatible, because shower valves, etc are brass, and plumbers regularly solder copper pipe to the brass valves… Now you got me curious, I’m going to have to research that a bit.

-- Pete

View duckmilk's profile (online now)

duckmilk

2542 posts in 1159 days


#14 posted 09-20-2017 12:46 AM

Nice job on the brass and the scales Pete! So did the solder just buff out? Beautiful!

-- "Duck and Bob would be out doin some farming with funny hats on." chrisstef

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com