LumberJocks

Wavy Live Edge multi-specie Desk Top

  • Advertise with us
Project by LoganN posted 01-06-2018 04:12 AM 1571 views 6 times favorited 25 comments Add to Favorites Watch

A buddy of mine in CA (I’m in NY) wanted a desk top out of multiple species. We settled on maple, mahogany, ash, and walnut. I designed this look and came up with how to do it. I decided to add a 1/8” groove between each species to give it a distinctive look. I used an epoxy putty called Apoxie instead of traditional epoxy because of how thin the grooves were. It’s an interesting substance and I will definitely use it again.
I did a lot of research trying to find the best cost to ship this cross country and eventually found that UPS gave the best cost to deliver to their door. It was heavy as all get out though, as you can see in the last picture!





25 comments so far

View JimRochester's profile

JimRochester

530 posts in 1696 days


#1 posted 01-06-2018 06:37 AM

Damn that’s the biggest cutting board I’ve ever seen.

Nice job my friend.

-- Schooled in the advanced art of sawdust and woodchip manufacturing.

View majuvla's profile

majuvla

12669 posts in 2949 days


#2 posted 01-06-2018 12:18 PM

Wow! That’s pretty interesting and unusual! Great idea.

-- Ivan, Croatia, Wooddicted

View Tennessee's profile

Tennessee

2876 posts in 2596 days


#3 posted 01-06-2018 01:08 PM

Pretty stunning!
When you created the wavy lines, did you use the double stacked through the bandsaw method, or did you do something else?
Also, the 1/8” line, really like that. Did you put a 1/16th on each edge before glue up or did you free hand the router through the wavy lines after glue up?

Love the result!

-- Tsunami Guitars and Custom Woodworking, Cleveland, TN

View Blackberry's profile

Blackberry

121 posts in 1235 days


#4 posted 01-06-2018 02:09 PM



Pretty stunning!
When you created the wavy lines, did you use the double stacked through the bandsaw method, or did you do something else?
Also, the 1/8” line, really like that. Did you put a 1/16th on each edge before glue up or did you free hand the router through the wavy lines after glue up?

Love the result!

- Tennessee

That’s really neat. Like Tennessee, I’d like to hear some more on the how it was done.

View splintergroup's profile

splintergroup

2203 posts in 1304 days


#5 posted 01-06-2018 02:30 PM

Very cool freeform!
I’ve found that for heavy/large packages, freight is often the cheapest. Places like Forward Air operate from airports and do airport to airport deliveries for fairly cheap.

View  woodshaver Tony C   's profile

woodshaver Tony C

6093 posts in 3434 days


#6 posted 01-06-2018 02:37 PM

Very attractive awesome looking desktop! Love the wave look! Nice job! I’m interested about how you went about making the top.
Thanks for sharing!

-- St Augustine FL, Experience is the sum of our mistakes!

View helluvawreck's profile

helluvawreck

31984 posts in 2948 days


#7 posted 01-06-2018 03:21 PM

Wow! This is a beautiful desktop and you have done a wonderful job on it.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View LoganN's profile

LoganN

422 posts in 1982 days


#8 posted 01-06-2018 03:57 PM

Hi all – Thank you fornthe kind words! I wish I could have done this on the bandsaw, but these pieces are over 1.5” thick and started between 76-80” long. I did this the long, old fashioned, way – with lots of templates and router work.
1 First I made a template out of 1/4” ply. I traced the template onto the slab and cut it with my jigsaw
2. I used my router and a 2” bit and template to smooth outtake cut lines
3. I realized that the 1/4” template had way too much flex and found some long 3/4” boards in the shop and recut my templates
4. I screwed the boards to the bottom of the slabs after cutting the lines and used the templates to clean up the lines.
5. I used a card scraper and sandpaper to even out the spaces so that the joints were solid

I used the template and a guide bearing to cut the 1/8” groove after I glued the boards up. This kept the width of the lines consistent

And I looked into various shipping options – the freight options were over $400 coast to coast. UPS came in under $300!
I hope this helps!

View EugdOT's profile

EugdOT

226 posts in 636 days


#9 posted 01-06-2018 04:00 PM

What a Fantastic and beautiful piece …. Great work

View recycle1943's profile

recycle1943

2024 posts in 1704 days


#10 posted 01-06-2018 04:51 PM

not sure why this hasn’t been selected as a top 3, the uniqueness, craftsmanship and thinking outside the box are superb.

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View ralbuck's profile

ralbuck

4828 posts in 2348 days


#11 posted 01-06-2018 05:15 PM



Damn that s the biggest cutting board I ve ever seen.

Nice job my friend.

- JimRochester


YUP!

-- Wood rescue is good for the environment and me! just rjR

View Roger Gaborski's profile

Roger Gaborski

260 posts in 3830 days


#12 posted 01-06-2018 05:16 PM

Beautiful table
Roger

-- Roger Gaborski, http://www.rogergaborski.com

View Monte Pittman's profile

Monte Pittman

29659 posts in 2419 days


#13 posted 01-06-2018 05:18 PM

That’s really nice

-- Nature created it, I just assemble it.

View DeLayne Peck's profile

DeLayne Peck

550 posts in 2283 days


#14 posted 01-06-2018 05:34 PM

Ditto to all of the above!

-- DJ Peck, Lincoln Nebraska. Lord, keep your arm around my shoulder and your hand over my mouth.

View rtbrmb's profile

rtbrmb

645 posts in 2470 days


#15 posted 01-06-2018 05:48 PM

Unique design and well executed. Your entire portfolio of work is impressive.

Thanks for sharing.

Bill in MI

showing 1 through 15 of 25 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com