LumberJocks

Kitchen Table - Making room for our grandchildren...

  • Advertise with us
Project by AJ1104 posted 02-07-2018 03:00 PM 4406 views 0 times favorited 11 comments Add to Favorites Watch

Hi LJ’s, I hope you all are having a good winter.

Well, with three grandchildren, we got to that point in life where we needed more room at the kitchen table. The existing tabletop was 60” round maple with a round-over from top and bottom. My idea was to a 24” leaf and re-profile the the edges to look more traditional than modern. I could not go much wider because the base was a pedestal style and it would not be stable.

I purchased the table leaf extender from Rockler, which worked like a charm. I cut the table in half, built the new leaf and sanded to 220. To re-profile the edge, first I had to take a 1/4” off with a straight bit to give me a flat edge for the round-over bit to ride. Then I routed the profile with a nice detail.

I finished it with Trans Tint Dye and wipe-on Poly. I ran into a lot of blotching problems with the original table sections, the wood they had used was not the best. They very cleverly hid that by spraying a tinted finish. After several attempts using different methods, I found that Charles Neil Blotch Control worked best.

All said and done, I certainly learned a lot about finishing a large piece. Next time I may try spraying..

We can all sit together to enjoy family times, at least until the next announcement! Thanks for looking! AJ

-- AJ





11 comments so far

View Timmie99's profile

Timmie99

24 posts in 522 days


#1 posted 02-07-2018 03:18 PM

Nice job! That’s the kind of project where you never know what will come up. I ran into that blotching thing one time. Pulled my hair out trying to get a good finish. Yours looks great!

View ralbuck's profile

ralbuck

4842 posts in 2350 days


#2 posted 02-07-2018 09:32 PM

The trials and tribulations just makes us better at whet we do.

Great job!

-- Wood rescue is good for the environment and me! just rjR

View helluvawreck's profile

helluvawreck

31994 posts in 2950 days


#3 posted 02-07-2018 10:36 PM

You did a nice job on this table.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View AJ1104's profile

AJ1104

517 posts in 1743 days


#4 posted 02-08-2018 12:30 AM

Thanks for the comments, guys. All ran smooth with this project until that blotching showed up -all over… I tried several times to get it right but could not seem to nail it down. Thank goodness I had LJ for a resource to see what others did to resolve this problem. It took about about two weeks for my arms and shoulders to feel normal again after all of that sanding! Lol.

Thanks again. AJ

-- AJ

View doubleDD's profile

doubleDD

7556 posts in 2127 days


#5 posted 02-08-2018 02:34 AM

Nice work with the table. Turned out great. Just when you thought things may be downsized.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View dannmarks's profile

dannmarks

546 posts in 665 days


#6 posted 02-10-2018 04:51 PM

I enjoyed what you wrote. It was good to hear the problems and then the solutions. We just refinished a table this week for the daughter. This was not nearly as involved as yours. We learned a lot also and the family is so very happy with what we did. Yours turned out really nice. I understand taking our a little to make it so you could go with a new profile on the edge. Really great work. The finish looks great.

View AJ1104's profile

AJ1104

517 posts in 1743 days


#7 posted 02-10-2018 10:21 PM

Dave.. yes Just when I thought it was time to downsize, something amazing happened….
Dannmarks. Thanks and yes, it seems that all of these projects have their share of problems to contend with. (Usually, I am the source of them!)

-- AJ

View dannmarks's profile

dannmarks

546 posts in 665 days


#8 posted 02-11-2018 04:17 PM

As I said we just stripped a second hand table and redid it to our daughter’s taste.

View AJ1104's profile

AJ1104

517 posts in 1743 days


#9 posted 02-11-2018 04:32 PM

Wow, “just stripped and redid” looks pretty amazing. I love the color and finish. great job!

-- AJ

View woodman5d's profile

woodman5d

10 posts in 68 days


#10 posted 06-12-2018 08:11 PM

That is a beautiful table. Just one question, what is the diameter of the pedestal?
I am building a 48” round table and can’t decide on how large to make the pedestal.

-- Don DuSang

View AJ1104's profile

AJ1104

517 posts in 1743 days


#11 posted 06-12-2018 09:19 PM

Hi Don. Thank you for the post. The diameter of the pedestal is 10”. The spread of each sets of legs are 36”. It’s pretty stable, but fully loaded I would say that it’s pushing its limits. Good luck! AJ

-- AJ

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com