My poor excuse for a height adjustable work table

  • Advertise with us
Project by therealSteveN posted 02-15-2018 02:10 PM 916 views 0 times favorited 5 comments Add to Favorites Watch

I have had a height adjustable bench for years, though I will admit mine doesn’t have the ease of one recently shown here. Pluses for the $$$$ encumbered is it is a smallish outlay for the stands, but in less than 5 seconds they can be used as stands again, so you are really not out a lot of cash you can’t justify. All of the wood was scap, and yes that is plain Jane CDX plywood, no fancy schmansy BB ply for me, though if you have some of that, feel free to use it.

I call it my poor man’s excuse for a height adjustable bench. It works, so I don’t knock it. It was brand new when I took these pics, much paint. finish and dried glue these days. My table can be recovered, or remade in less than 30 minutes, as you can see it isn’t real involved, but it doesn’t move at all.

I bought the stands years ago at Sears at Christmas. They were usually 99 bux apiece, outrageous. They had a 2 for 1 at 39 bux, and at the time I didn’t have a decent outfeed table for a new table saw, and they allowed me to get by with a short bed jointer for years, with on, and off rollers doing a lot of the work holding on longer pieces. Today I would look at Harbor Freight. I believe they have some very similar, tilting tops, and height adjustable. Possibly Amazon as well.

I saw that much better thread, and thought well shoot maybe someone doesn’t know what a crazy thought will get ya. I can easily lift off the top, and there are 2 large capacity rollers to use for anywhere they work.
The only work pic I have of it working, was also right when I made it, no woodworking then. I was in the middle of a large tile job, and got tired of kneeling down to make cuts. I thought if I just had some way to lift this saw up…..........

For years I used it for an on the go chop saw bench, in the last years I usually use it for an assembly bench. If you have ever needed to get on a ladder to assemble a tall case, you will understand the luxury of a sometimes low bench to assemble from.

Thanks for looking

-- Think safe, be safe

5 comments so far

View mel52's profile


594 posts in 471 days

#1 posted 02-16-2018 02:48 AM

If it works, it works. I have had a lot worse than you could even dream of, but they worked.

-- MEL, Kansas

View Rick S...'s profile

Rick S...

10913 posts in 3239 days

#2 posted 02-16-2018 03:12 AM

Very Nice Indeed & Well Done!

-- I Chose "The Road Less Travelled" Now I'm Totally Lost! (Ontario, CANADA)

View James E McIntyre's profile

James E McIntyre

182 posts in 1498 days

#3 posted 03-06-2018 09:14 PM

Nice work. It shows your craftsmanship and creativity.

-- James E McIntyre

View therealSteveN's profile


1740 posts in 780 days

#4 posted 03-07-2018 12:40 AM

Probably the absolute worst example of my craftsmanship, and creativity, it was however catching a grounder when I was needing a solution. Got the tile saw up in the air, and didn’t cost me a dollar in material that wasn’t already laying around.

-- Think safe, be safe

View canadianchips's profile


2613 posts in 3203 days

#5 posted 10-14-2018 02:31 PM

Some of our most useful “Jigs” or “Work areas” are not the prettiest. It does NOT have to be pretty to be functional. (I am walking example of that).

-- "My mission in life - make everyone smile !"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics