Open and Shut case ... I mean boxes

  • Advertise with us
Project by oldnovice posted 03-12-2018 03:46 AM 1128 views 3 times favorited 14 comments Add to Favorites Watch

Shortly after I got my first router (a Craftsman 1/2hp) in 1976 I went on a box cutting binge!

I made an adjustable template and a very crude 12”×12” router table, and started cutting out boxes!
All these boxes have sliding dovetail tops and, as can be seen in the photo, were all plunge cut while dovetails were cut on the router table.

In the first picture, starting at the top box is clear pine, then fir, red oak, and walnut. The photo shows only four of the boxes I made as I really made many more and gave most of them away. I think there may a couple left aroind the house.

I kept a couple of these boxes on my desk at work which seemed to intrigue one of the young new hires who asked me to make him one to “store” his Seiko watch (I could not afford a Seiko and here comes a young kid with one on his wrist) and he wanted out of zebra wood!

Check my home page to see why I am posting old projects!

-- "I never met a board I didn't like!"

14 comments so far

View Jerry's profile


2741 posts in 1766 days

#1 posted 03-12-2018 04:48 AM

I really like these, beautiful, useful, and efficient!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be.

View stefang's profile


15881 posts in 3452 days

#2 posted 03-12-2018 11:00 AM

Nice boxes handy for a lot of different uses.

-- Mike, an American living in Norway.

View Andrek's profile


400 posts in 2028 days

#3 posted 03-12-2018 11:03 AM

nice little boxes to hide little treasures.

-- andrek

View doubleDD's profile


7642 posts in 2161 days

#4 posted 03-12-2018 01:15 PM

Nice job on the boxes. I like this type for quick and easy storage. Always a perfect little gift.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Andre's profile


2011 posts in 1924 days

#5 posted 03-12-2018 01:27 PM

Nice boxes, good to have a selection of fine woods! Reminded me that I bought a Seiko watch in Hawaii in 1990 at a flea market, thought it was a knock of for $40. Had the crystal replaced last year and cleaned still working great! Still have my first digital watch, $9.95 Timex, think 1983? Still works!

-- Lifting one end of the plank.

View Steve's profile


605 posts in 701 days

#6 posted 03-12-2018 01:42 PM

Very nice boxes. Along the lines of old watches, who still has their old calculator watch? haha

View Handtooler's profile


1626 posts in 2250 days

#7 posted 03-12-2018 02:43 PM

Magnificent craftsmanship especially with your early Craftsman router. I still have the 11/2 hp super router of the mid 70’s that I still use. I’ve owned two Sieko watches which I purchased in the Guam Navy Exchange in 1969 for about $20-35.oo. They were wonderful time pieces.

-- Russell Pitner Hixson, TN 37343

View sras's profile


4873 posts in 3248 days

#8 posted 03-12-2018 02:49 PM

Nice collection!

-- Steve - Impatience is Expensive

View Jim Bertelson's profile

Jim Bertelson

4206 posts in 3283 days

#9 posted 03-12-2018 03:02 PM

Now those boxes definitely outpoint the mirror. I may use that idea, at least the top, for some in the future. And the fact you still have them attests to their durability. Pretty things.

Right now I am cranking up the router here in La Conner to help me install a flush mounted vise. Not as much fun, but a long overdue shop addition…

-- Jim, Anchorage Alaska

View Woodwrecker's profile


4184 posts in 3694 days

#10 posted 03-12-2018 03:11 PM

Nice work brother.

View GR8HUNTER's profile


4563 posts in 831 days

#11 posted 03-12-2018 03:23 PM

very neat little boxes …GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Joe's profile


482 posts in 1205 days

#12 posted 03-12-2018 05:24 PM

Great boxes, very nice. Thanks

-- CurleyJoe, "You only learn from your mistakes"

View helluvawreck's profile


32061 posts in 2985 days

#13 posted 03-12-2018 09:37 PM

These are all beautiful boxes. Nice work!

helluvawreck aka Charles

-- helluvawreck aka Charles,

View a1Jim's profile


117203 posts in 3695 days

#14 posted 03-13-2018 01:48 AM

I like these boxes great design and super wood.great job.

-- wood crafting & woodworking classes

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics