LumberJocks

Tambour Top Box

  • Advertise with us
Project by CalgaryBill posted 03-12-2018 10:50 PM 1002 views 7 times favorited 15 comments Add to Favorites Watch

On our recent trip to New Zealand and Australia I saw several of these boxes and admired them. When we returned home I remembered that I had a plan for a box like that from a magazine that I had filed away. I dug it out and proceeded to attempt to make that box. It proved to be quite a challenge, but I did succeed in completing the box. In the process I used my tablesaw, bandsaw, biscuit joiner, several different router bits as well as sanders. It’s quite a fascinating box. When you open the drawer the tambour top retracts like a mini roll-top desk and reveals a shelf inside. The tambour slides in a curving track in the sides of the box and its bottom edge is attached to the back of the drawer. The process also required me to made several templates to rout the track in the sides of the box. I used my usual finish of Minwax Tung Oil and buffed it with the Beall buffing system. Thanks for looking.

-- Calgary Bill





15 comments so far

View Woodenwizard's profile

Woodenwizard

1331 posts in 3069 days


#1 posted 03-12-2018 11:06 PM

Nicely done! The opening of the top is clever and the looks are unique. What magazine did the plans come from?

-- John, Colorado's (Wooden Wizard)

View Woodknack's profile

Woodknack

11792 posts in 2406 days


#2 posted 03-13-2018 12:11 AM

Very nice Bill

-- Rick M, http://thewoodknack.blogspot.com/

View Kelster58's profile

Kelster58

670 posts in 566 days


#3 posted 03-13-2018 12:27 AM

That is very nice. You did a GREAT job. I would love to see plans for it….....

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View ralbuck's profile

ralbuck

4578 posts in 2292 days


#4 posted 03-13-2018 12:37 AM

Extreme!

-- Wood rescue is good for the environment and me! just rjR

View Hawaiilad's profile

Hawaiilad

3189 posts in 3047 days


#5 posted 03-13-2018 01:31 AM

Wonderful build on that hard piece Bill.

-- Larry in Hawaii,

View oldnovice's profile

oldnovice

6899 posts in 3394 days


#6 posted 03-13-2018 02:19 AM

Boxes are everywhere but thus one is somewhat unique and I do like it!
Could that drawer be called a drolltop?

-- "I never met a board I didn't like!"

View JTTHECLOCKMAN's profile

JTTHECLOCKMAN

223 posts in 3175 days


#7 posted 03-13-2018 03:17 AM

I like this idea and may have to borrow it and scale down to a pen box for next years contest. Very nice work and thanks for showing.

-- John T.

View Terry Osnach's profile

Terry Osnach

32 posts in 1290 days


#8 posted 03-13-2018 03:33 AM

Great job, the plan came from Woodworking Journal #181.

View jeffswildwood's profile

jeffswildwood

3233 posts in 2003 days


#9 posted 03-13-2018 11:56 AM

Very nice box. I saw a video of building this and have always wanted to try it.

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View CalgaryBill's profile

CalgaryBill

81 posts in 3696 days


#10 posted 03-13-2018 03:24 PM



Nicely done! The opening of the top is clever and the looks are unique. What magazine did the plans come from?

- Woodenwizard

Plans were in the April 2011 issue of Woodworker’s Journal. There’s also a video of the build online.

-- Calgary Bill

View helluvawreck's profile

helluvawreck

31393 posts in 2892 days


#11 posted 03-13-2018 07:59 PM

This is a beautiful box and so nicely done.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Grumpy's profile

Grumpy

23997 posts in 3877 days


#12 posted 03-13-2018 10:27 PM

Bill , nice job and congratulations on your ‘Daily Top 3’ award.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View stefang's profile

stefang

15881 posts in 3360 days


#13 posted 03-14-2018 01:04 PM

Very nicely done Bill. I have an old Fine woodworking router book from late 80’s or early 90’s with an article and plan for one of these. They are more complex that many might think, so kudos for your great result.

-- Mike, an American living in Norway.

View bushmaster's profile

bushmaster

3101 posts in 2308 days


#14 posted 03-14-2018 07:50 PM

that nice, love those boxes.

-- Brian - Hazelton, British Columbia

View JTTHECLOCKMAN's profile

JTTHECLOCKMAN

223 posts in 3175 days


#15 posted 03-15-2018 03:22 AM



Very nicely done Bill. I have an old Fine woodworking router book from late 80 s or early 90 s with an article and plan for one of these. They are more complex that many might think, so kudos for your great result.

- stefang

That is what I am thinking. I have to see if I have that article that some referenced to. Thanks for that. I want to scale this down quite abit to hold a couple pens. So that will be a challenge.

-- John T.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com