LumberJocks

Miter Saw Drill Press Station

  • Advertise with us
Project by bondogaposis posted 05-27-2018 06:52 PM 1577 views 12 times favorited 11 comments Add to Favorites Watch

After recently scrapping my radial arm saw I acquired a miter saw. I needed a cabinet to accommodate it and I wanted to incorporate the drill press into the same cabinet. I always thought that the space under a drill press table is largely wasted. This is my solution to incorporate a bench top drill press with miter saw so that long boards can laid across the foot of the drill press when using the miter saw. Of course I needed storage too and dust collection for the miter saw. This is what I came up with. Thanks for looking.

-- Bondo Gaposis





11 comments so far

View woodbutcherbynight's profile

woodbutcherbynight

5488 posts in 2491 days


#1 posted 05-27-2018 07:01 PM

NICE!!! Well laid out and you have dust collection covered as good as it can get.

-- Live to tell the stories, they sound better that way.

View recycle1943's profile (online now)

recycle1943

2026 posts in 1704 days


#2 posted 05-27-2018 07:49 PM

Sorry it took so long to comment but looking at the cabinet I kept drooling on my keyboard and couldn’t type

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View kocgolf's profile

kocgolf

333 posts in 2261 days


#3 posted 05-27-2018 10:30 PM

Smart to put it with the drill press like that. Has me rethinking my layout plans…

View therealSteveN's profile

therealSteveN

909 posts in 656 days


#4 posted 05-27-2018 11:03 PM

Dandy set up, could give a lot of ideas.

Thanks for posting.

-- Think safe, be safe

View Rick  Dennington's profile

Rick Dennington

6007 posts in 3277 days


#5 posted 05-27-2018 11:22 PM

Bondo,

Stellar job on the build of the miter saw/ drill press station…..I built one for mine years ago, but I still have the RAS with mine….But like you, I’m about ready to scrap the RAS for a sliding miter saw….The radial still works good, but takes up more space…...

-- " It's a rat race out there, and the rats are winning....!!"

View helluvawreck's profile

helluvawreck

31985 posts in 2949 days


#6 posted 05-28-2018 12:38 PM

This is a fine miter saw and drill press base. It’s a wonderful addition to your shop.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Firewood's profile

Firewood

388 posts in 1716 days


#7 posted 05-28-2018 02:14 PM

Bondo – That looks great. I’m in the middle of building a mitersaw station, but not too far along to steal a couple of ideas from your build. Nicely done.

-- Mike - Waukesha, WI

View Chuck Anstrom's profile

Chuck Anstrom

87 posts in 3107 days


#8 posted 05-28-2018 03:50 PM

A great idea.

-- Chuck Anstrom - Virginia

View bondogaposis's profile

bondogaposis

4895 posts in 2433 days


#9 posted 05-28-2018 04:46 PM

Here is a feature that I forgot to include in the original photos, a slide out Forstner bit tray.

-- Bondo Gaposis

View Triq's profile

Triq

10 posts in 195 days


#10 posted 05-29-2018 10:19 AM

Well now, you’re just bragging.

Beautiful setup. Wish I had a permanent space to house my tools.


Here is a feature that I forgot to include in the original photos, a slide out Forstner bit tray.

- bondogaposis


View scrollingmom's profile

scrollingmom

1171 posts in 2546 days


#11 posted 05-31-2018 02:44 PM

Very nice. Everything looks nice and handy.

-- Kelly, Allen,KS

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com