LumberJocks

Green and Green inspired hall table

  • Advertise with us
Project by revanson11 posted 06-02-2018 12:58 PM 1410 views 13 times favorited 23 comments Add to Favorites Watch

A while back I was looking through some past editions of Woodsmith magazine and came across this table design in issue 204. It looked like something that would look good in our family room and my wife enthusiastically agreed. Where Woodsmith used mahogany, maple and wenge for their table I decided to use QSWO instead of the mahogany to match our other pieces. The hardest part of making this table was the amount and length of the through tenons. There are eight 1/2” tenons that go through the 3” wide legs. Doing this by hand looked daunting to me and as I was showing my wife she asked me if I didn’t have a machine to do them with. With her encouragement I researched mortise machines and settled on the Powermatic 701. Wow what a nice machine. All together there are 28 mortise and tenon joints and having the 701 made quick work of them. For the top I wanted some QSWO that was highly figured so I contacted Zack at Dunham Hardwood in Iowa to pick me some matching boards. As you can see he did a nice job. I ammonia fumed the pieces for 4 to 5 hours and then wash coated them with some garnet shellac to seal the pieces. After 3 coats of Waterlox I assembled the table. The Wenge accent pieces set off nicely along with the figured maple. For me a challenging piece for sure but in the end well worth the effort.

-- Randy, Central MN





23 comments so far

View SOG's profile

SOG

22 posts in 1404 days


#1 posted 06-02-2018 01:20 PM

Envy. Envy. Another great piece of work. You should be proud.

View splintergroup's profile

splintergroup

2077 posts in 1249 days


#2 posted 06-02-2018 01:49 PM

Absolutely stunning! The fuming looks great, did you put effort into selecting boards for color? I know the frustration of having to balance the time in the fuming booth when the wood doesn’t react equally.

View helluvawreck's profile

helluvawreck

31403 posts in 2894 days


#3 posted 06-02-2018 02:15 PM

This is an outstanding hall table and so beautifully done.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View MadeinMT's profile

MadeinMT

249 posts in 2187 days


#4 posted 06-02-2018 02:23 PM

Lovely piece. Excellent work.

-- Ron, Montana

View Ottacat's profile

Ottacat

480 posts in 1879 days


#5 posted 06-02-2018 02:55 PM

I must say I’m impressed. I’m neither a fan of oak or overly ornate G&G furniture but you’ve come up with an outstanding piece. The design is elegant without the pretentious fussiness of some of the G&G inspired pieces I’ve seen. Beautiful lines and proportions and of course, great craftsmanship and finishing. A true heirloom piece.

View Valete's profile

Valete

90 posts in 1486 days


#6 posted 06-02-2018 03:23 PM

Great project.

View revanson11's profile

revanson11

110 posts in 2360 days


#7 posted 06-02-2018 04:08 PM

Except for the top, all of the white oak if from the same tree and matches color-wise. Thanks for all the nice comments.

-- Randy, Central MN

View MNweeder's profile

MNweeder

2 posts in 1964 days


#8 posted 06-02-2018 04:12 PM

Love the design and the workmanship!

View TungOil's profile

TungOil

945 posts in 522 days


#9 posted 06-02-2018 05:30 PM

Nicely done! Almost feels like there is some Frank Loyd Wright influence in there along with Greene & Greene.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View Billfish's profile

Billfish

144 posts in 1599 days


#10 posted 06-02-2018 05:35 PM

Beautiful work Randy some great looking oak and workmanship

Bill

View therealSteveN's profile

therealSteveN

671 posts in 601 days


#11 posted 06-02-2018 05:39 PM

GnG with a touch of Asian influence. I like how it looks, nice job.

Thanks for posting, and Congrats on your 3.

-- Think safe, be safe

View Dennis Zongker's profile

Dennis Zongker

2745 posts in 3619 days


#12 posted 06-02-2018 05:51 PM

The first thing that I said when I looked at the pictures, Beautiful!

-- Dennis Zongker

View pintodeluxe's profile

pintodeluxe

5706 posts in 2840 days


#13 posted 06-02-2018 07:33 PM

Great display of craftsmanship here. The table came out great, I really like it in white oak.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View AandCstyle's profile

AandCstyle

3075 posts in 2284 days


#14 posted 06-02-2018 09:26 PM

That is certainly one beautiful piece! I don’t think people realize how much effort and craftsmanship G&G details require. You really hit a home run with this.

-- Art

View CampD's profile

CampD

1675 posts in 3513 days


#15 posted 06-03-2018 12:47 PM

Beautiful Piece, you should be proud and I bet the Wife is thrilled!

-- Doug...

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com