LumberJocks

The Gift of Walnut

  • Advertise with us
Project by jbschutz posted 07-11-2018 09:21 PM 1168 views 4 times favorited 12 comments Add to Favorites Watch

Yes, Please…So, a good friend asked me if I could use a hunk of walnut about 40 inches long and 7 inches across and 1 inch thick, full of knots, inclusions, cracks, etc. I said, trying not to sound too eager, that might be able to make something out of it. After some careful calculating, I decided there were a number of areas that could be salvaged….made into something.
This is the result…...5 turned pieces, each about 6 inches across….two square bowls and 3 round ones, each with design elements. I reverted to my vineyard theme for three of them and did a little simple art-deco motif on one.
The vines and lines are oak, and the grapes are koa from Hawaii. The pieces are finished with satin poly. and each has soft leather applied to the foot.

-- jbschutz www.johnschutz.com





12 comments so far

View Eyal's profile

Eyal

91 posts in 1772 days


#1 posted 07-11-2018 09:31 PM

it really looks fabulous. i loves the vines element and the leather on the bottom.

View Lazyman's profile

Lazyman

2644 posts in 1593 days


#2 posted 07-11-2018 09:47 PM

Cool. at first glance I thought you just had pennies sitting in them.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View JL7's profile

JL7

8690 posts in 3171 days


#3 posted 07-11-2018 10:04 PM

Yes please! I can relate! Well done my friend these are all well done and unique…..bravo!

-- Jeff .... Minnesota, USA

View Jim Jakosh's profile

Jim Jakosh

21757 posts in 3311 days


#4 posted 07-11-2018 11:29 PM

Great pieces from the good parts of that board. Very nice designs and finish!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View ZAGREB's profile

ZAGREB

1089 posts in 1856 days


#5 posted 07-12-2018 05:18 AM

Great pieces,very unique

-- bambi

View Boxguy's profile

Boxguy

2767 posts in 2473 days


#6 posted 07-12-2018 07:19 AM

John, what beautiful work. You have really let the wood speak. American Walnut, White Oak, and Koa really make a stunning combination. I like the variety of using a band sawn slot, and a table sawn slot in your inlays. Nice call. The look created by having the inset oak intersect with the turned bowl portion really is an exceptionally nice effect. It seems like the oak gets wider and then narrows. Well done.

It looks like you insert Koa dowels before you turn the pieces…is that the case? Or do you insert thinner circles of Koa later in the process? Keep turning and keep posting.

-- Big Al in IN

View jbschutz's profile

jbschutz

548 posts in 2897 days


#7 posted 07-12-2018 12:35 PM

To answer a couple of LJ questions…..The stripes and vines are put in during the glue-up of the blank….The crossing vines are done in two steps, one glue-up per vine.
The grapes are done after the bowl is rough turned. I drill cavities with 3/8 and 1/2 inch Forstner bits in two or three layers. I cut my own plugs from thin Koa in those same sizes. I will drill 8-10 holes about 3/16 inch deep, fill those with plugs, and then, after turning those plugs flat, drill another set of overlapping holes, and filling them. A third layer may be needed to give the best look. After all the “grapes” have been installed, final turning and sanding
on the lathe brings the piece to finish-ready…...satin poly.

-- jbschutz www.johnschutz.com

View GR8HUNTER's profile

GR8HUNTER

5168 posts in 918 days


#8 posted 07-12-2018 01:34 PM

WOW … GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Steve's profile

Steve

756 posts in 788 days


#9 posted 07-12-2018 01:49 PM

Those turned out great. (Asking myself why I don’t have friends that give me chunks of walnut).

View ralbuck's profile

ralbuck

5424 posts in 2472 days


#10 posted 07-12-2018 05:35 PM



Great pieces from the good parts of that board. Very nice designs and finish!!

Jim

- Jim Jakosh


Great save on the cracked and warped wood.

-- Wood rescue is good for the environment and me! just rjR

View pottz's profile

pottz

3595 posts in 1190 days


#11 posted 07-12-2018 07:27 PM

very nice work,there all just beautifully done.it just shows no wood should be wasted,it all has a purpose.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View majuvla's profile

majuvla

13399 posts in 3073 days


#12 posted 07-14-2018 04:31 PM

When you have walnut , you can’t miss with a project. Great looking plates!

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com