LumberJocks

small end grain board

  • Advertise with us
Project by recycle1943 posted 07-25-2018 08:21 PM 844 views 1 time favorited 9 comments Add to Favorites Watch
small end grain board
small end grain board No picture No picture No picture No picture No picture
Zoom Pictures

well, true to my forum name I ‘saved’ some of my scrap ends from bowls. I found that if I cut them all the same heighth

and gathered enough of them

I could end up with a cute functional cutting board

Of course it’s not very thick, about 9/16”

but it will work for small jobs

btw – the scrap ends are the remnants of 20 bowls I’m finishing up.

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them





9 comments so far

View ralbuck's profile

ralbuck

5008 posts in 2388 days


#1 posted 07-25-2018 08:50 PM

Nice board!
I am afraid iI would be very “bored” trying to glue that all together.

-- Wood rescue is good for the environment and me! just rjR

View ZAGREB's profile (online now)

ZAGREB

979 posts in 1772 days


#2 posted 07-25-2018 09:20 PM

when i look in your board i feel drunk…
nice board, buddy

-- bambi

View Jim Jakosh's profile

Jim Jakosh

21133 posts in 3227 days


#3 posted 07-25-2018 10:21 PM

You sure sues up all the extra pieces! I have to make something like that too.

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View poospleasures's profile

poospleasures

773 posts in 2606 days


#4 posted 07-25-2018 11:12 PM

This wise old owl is not only a bowl maker. He has a brain also and is very efficient also. Good job.

-- I,ve had amnesia for as long as I can remember. Vernon

View doubleDD's profile

doubleDD

7650 posts in 2165 days


#5 posted 07-25-2018 11:50 PM

Always a pleasure to see how to use up all those cut offs. Well done. I do the same when they start building up.
I’m finishing one up myself.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Oldtool's profile

Oldtool

2719 posts in 2313 days


#6 posted 07-26-2018 12:09 AM

Nice recycle of the bowl cutoffs, very functional. As for the thickness, I see no problem here, no rule that cutting boards need be super thick. If you think about it, the extra thickness doesn’t really provide any additional use over the 9/16”, just heavier to move around. Well, unless your going to bang it with a huge cleaver I guess, but a butcher’s table is for that.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View Hawaiilad's profile

Hawaiilad

3260 posts in 3143 days


#7 posted 07-26-2018 04:06 AM

Great cutting board Dick. We use a bamboo cutting board that is thinner than 1/2” thick. I have made so many thick boards but for some reason, they never make it into our kitchen.

-- Larry in Hawaii,

View helluvawreck's profile

helluvawreck

32073 posts in 2988 days


#8 posted 07-26-2018 12:35 PM

These are nice cutting boards.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View peteg's profile

peteg

4373 posts in 2945 days


#9 posted 07-26-2018 09:22 PM

Great use of off cuts Dick the finish is rather striking with its random pattern,
If you’re worried about the thickness you could possibly laminate it onto a backing.
nice result
cheers
pete

well done on DT3 :)

-- Pete G: If you always do what you always did you'll always get what you always got

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com