LumberJocks

Rebate saw

  • Advertise with us
Project by Dave Polaschek posted 09-14-2018 01:50 PM 796 views 2 times favorited 23 comments Add to Favorites Watch

I have an existing rebate saw (or kerfing plane) with a fixed 3/8” fence. That’s great for most of my resawing needs, since I end up with 1/4” thick finished stock. But sometimes I need to work thicker. And sometimes I want to use the saw for cutting a rebate (rabbet).

I thought about making a saw with an adjustable fence, but I still don’t have tools for threading dowels, and I really like the no fuss approach of a fixed fence, so I decided to make another fixed fence saw, this time with a 3/4” fence.

That meant starting with a 7/4 or 8/4 chunk of wood. I had a scrap left over from having built my twin-screw vise, so I started marking it up and drilling holes (picture 4). I roughed in a handle with coping saw and rasps, and cut the rabbet in the bottom. I used my existing kerfing plane, which gave me a 3/8” thick fence, and the blade mounted 3/8” from the side, and an almost perfect 3/4” thick cut (pictures 5 and 6).

I also had a piece of a Great Neck panel saw, which I had a friend cut down for me.

Once that was done, I started shopping around for saw nuts that would work in a 1.5” thick handle. Nobody wanted to sell them to me, so I got some barrel nuts and carriage bolts from Fastenal. The barrel is 5/16” diameter, which is almost exactly the size of the holes in the saw plate, and the threads are 1/4-20, which is dead common.

I also practiced carving on the handle. It’s my first attempt, so it isn’t great, but it doesn’t make me cringe, so I’m happy with it.

With all the parts acquired, drilling the holes for the saw nuts using my post drill was dead simple. Put a 1/4” hole all the way through the handle for the nuts, then come about an inch in with a 5/16” drill bit for the barrel. I had to adjust the hole in the saw plate by about 1/32 but that was quick work with a chainsaw file.

Hit it with a coat of linseed oil and screw it together. Works like a charm!

-- Dave - Minneapolis





23 comments so far

View oldrivers's profile

oldrivers

1403 posts in 1681 days


#1 posted 09-14-2018 02:10 PM

Great project, I like that! You did a beautiful job, the design on the handle reminds me of the old Disston saw design.Job Well Done!

-- Soli Deo gloria!

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#2 posted 09-14-2018 02:14 PM

Thanks! Next project is my plane till, and since it’s all 3/4” lumber, I’m thinking I might need some 3/4” rabbets.

The handle carving was meant to look traditional. I was surprised how easily it went with a v-tool and mallet.

-- Dave - Minneapolis

View GR8HUNTER's profile

GR8HUNTER

4526 posts in 827 days


#3 posted 09-14-2018 02:17 PM

picky 2 reminds me of a pot leaf LOL … very nice carving and saw making skills here … love this mighty fine rabbet saw …. GREAT JOB :<)) no doubt will be top 3 so gratz LOL

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#4 posted 09-14-2018 02:27 PM

Yeah, Tony. I saw that, but the hex flower was easy to lay out with a compass and gave me some practice carving curves. Plus it was an excuse to repurpose a banged up cheap screwdriver into a stippling tool for the background. Thanks!

-- Dave - Minneapolis

View balidoug's profile

balidoug

493 posts in 2593 days


#5 posted 09-14-2018 02:27 PM

nice work. and if you decide down the road to go with an adjustable fence the conversion is easy. Enjoy

-- From such crooked wood as that which man is made of, nothing straight can be fashioned. Immanuel Kant

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#6 posted 09-14-2018 02:29 PM

Thanks, Doug! Yeah. Or it’ll give me an excuse to make another handle. ;-)

-- Dave - Minneapolis

View HokieKen's profile

HokieKen

6141 posts in 1253 days


#7 posted 09-14-2018 03:06 PM

Nice Dave! Where’s the plug at? ;-P

-- Kenny, SW VA, Go Hokies!!!

View Jim Jakosh's profile

Jim Jakosh

21101 posts in 3220 days


#8 posted 09-14-2018 03:15 PM

That is a cool saw. I never saw one before..I learned something new today!! Thanks.

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Oldtool's profile

Oldtool

2713 posts in 2305 days


#9 posted 09-14-2018 03:37 PM

Nice build Dave all around, useful tool, excellent craftsmanship on the construction, and some pretty good carving shows all as a handmade device.

You should try making one of these with an adjustable fence, it’s not that hard and you don’t need a threading tool. Use a clamping bar on the adjustment arms. That’s what I did for my kerfing plane / saw build and this allows so much more use, especially for rabbets of varying dimensions.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#10 posted 09-14-2018 03:37 PM

It’s a weird one Kenny. No tail.

Jim, also known as a kerfing plane if you’re using it to make a kerf before resawing. I should go back and add a link to my other one.

-- Dave - Minneapolis

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#11 posted 09-14-2018 03:39 PM

Yeah, I should make an adjustable one, but I do like the non-adjustable version too. So there will probably be another one sometime down the road.

-- Dave - Minneapolis

View EarlS's profile

EarlS

1513 posts in 2462 days


#12 posted 09-14-2018 05:21 PM

I like the retro look of it. The carving looks good too, especially your initials. Before long you are going to run out of space and have to make more cabinets, then move to a bigger shop with all of your hand made hand tools.

-- Earl "I'm a pessamist - generally that increases the chance that things will turn out better than expected"

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#13 posted 09-14-2018 05:45 PM

Thanks, Earl. I’m told oak is one of the harder woods to carve well, so I guess I did ok.

Next project is a plane till. And once that’s done, I’ll get to making planes…

-- Dave - Minneapolis

View duckmilk's profile

duckmilk

3116 posts in 1439 days


#14 posted 09-14-2018 10:02 PM

That looks great Dave, and useful too! Nicely done!

-- "Duck and Bob would be out doin some farming with funny hats on." chrisstef

View Dave Polaschek's profile

Dave Polaschek

2587 posts in 696 days


#15 posted 09-14-2018 10:57 PM

Thanks, Duck! I’ve gotten a lot of use out of the other one already, and it seemed like the hardest part of this was finding the overly long saw nuts. Having one to use as a pattern sure makes it easier.

-- Dave - Minneapolis

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com