LumberJocks

recycle1943's Forum Topics

  • Advertise with us
View recycle1943's:homeworkshopprojects (58)blog (32)reviews (0)forum topics (18)buddies (33)favorites (9)activity logWatch
09-03-2018 05:46 PM

The deal of the day and tomorrow - 0 replies

and the day after.so here’s the deal – a couple weeks ago I bought a Sears 16” scroll saw real cheap because it supposedly didn’t work and because the blade holders will fit on my 20” scroll saw. I did that because Sears Parts Direct sent me the wrong parts and then finally admitted that they didn’t have wh...

05-15-2018 05:45 PM

do you recognize this wood ? - 30 replies

A while back I bought some lumber somewhere and in the pile I came across two 5/4×8” x 8’ planks. At first glance I thought them to be white oak, then I picked one up and knew it wasn’t oak – way too light.I planed one down to see what I had and found it had a little cupping but no twist nor bow so I ended up with a...

03-19-2018 08:13 PM

Beisemeyer Fence for sale (or trade) - 10 replies

Long story short – I bought a new Delta 36L336 and ended up with 2 Biesemeyer fences. I had already sold the one fence with my old delta 812 because I don’t care for the Biesemeyer compared to my Incra fence system.So I have a brand new Biesemeyer fence that I don’t want.However I would be most happy to trade for some wood o...

01-26-2018 08:37 PM

Delta 36L - 336 Type 2 - 12 replies

Well, I did itI had the extra $$$ and I couldn’t stand being ahead so I ordered a new Delta unisaw. It comes with a Biesemeyer fence and short extension table. I have no use for either one so I lumped it in with my ‘old’ unisaw and sold it with the saw. I kept my Incra TS-LS fence but had to buy an upgrade which consisted of...

12-23-2017 10:21 PM

table saw switch - 20 replies

I have a 10” unisaw 36-812 and just for insurance I thought I would get a starter switch to have on hand. Unfortunately it is discountinued and I can’t seem to find a replacement but I know there’s one out there and sure would appreciate it if someone could point me in the right direction. Bear in mind that I’m not and ...

07-22-2017 06:59 PM

resin epoxy - 10 replies

I’ve never done any epoxy projects BUT -I have a table that will be exposed to the elements all summer long and was wondering if anyone has had any luck with epoxies in the elements ?I am open to any and all suggestions ( Please )

01-03-2017 12:34 PM

Byrd Shelix Cutterhead - 58 replies

I’ve managed to stash away some disposable income and my mind has wandered to the Byrd cutterhead for my DW735.To be honest, my planer finish is quite sufficient with the 2 edged blades designed for the DW735 – HOWEVER, I just can’t stand not having a toy that may or may not make life easier in the wood shop.My planer work in...

07-25-2016 10:53 AM

I'm curious about - 14 replies

who owns/moderates or decides to place an item in the Daily Top 3 ? I see a LOT of repetitive decisions when there are others that are more deserving that day.inquisitive minds want to know ?

05-01-2016 03:05 PM

how do I edit my favorites ? - 2 replies

Hi, I have an item in my favorites section that I would like to delete but can’t find a way to do it – anybody have a cure ? Thanks in advance

05-23-2015 07:19 PM

Changing a chuck - 10 replies

I have a Sears 149.213330 Radial Drill Press – nothing wrong with it BUT I have a tendancy to attempt to make things a little easier on ME and presently that endeavor is to put a keyless chuck on the dp. The problem is that I can’t figure out how to remove the existing chuck to put a keyless chuck on it.The chuck on the dp is an RJ 3...

04-29-2015 11:33 AM

questions about Jet Band saw - 4 replies

Curious about whether the blade guides ( rub blocks) on the Jet will be as reliable as the roller bearings on my Grizzly. Only asking because I may be able to get one fairly cheap and use for a secondary saw.

10-13-2014 11:04 AM

Makita model 2040 - 15" Planer - 3 replies

I decided to sell the Makita 15” planer that purchased a while back. The reason ? For me it sits too low and just a little too cumbersome. I guess I’m too used to my DeWalt 13” on it’s stand.About the Makita – It was rebuilt several years ago with new rollers and blades and was used 3 times maximum. It really ...

08-27-2014 05:07 PM

DeWalt 7767 Shaper - 0 replies

I have a DeWalt 7767 Floor model 1hp shaper for sale. $150 pick up in Malvern, Ohio 44644This would be a great starter shaper for the small shop, it’s in excellant condition.you’ll have to send me your email addy or a phone # and I can get pictures to you.

06-26-2014 01:35 PM

tools for sale - 0 replies

I have for sale 1 – 12 1/2” Delta table top planer 22-560 looks new1 – 12” Sears Electronic Band Saw w/several new blades 113.238440 w/manual1 – 10” Sears table saw – cast iron w/wings right and left 315.228410 w/manual1 – Biesemeyer Fence system 1 – Biesemeyer 78-960 table saw blade guard1 – older Sears Drill Press1 – 9” PowerCraft table saw on...

06-26-2014 01:11 PM

question about selling tools - 2 replies

I recently acquired a shop load of tools that I consider an upgrade and I now have a several saw’s etc I need to sell. I didn’t know if I could post that kind of thing on here ? sure don’t want to tilt the cart (so to speak)

06-23-2014 04:58 PM

Delta 36-820 - 8 replies

OK – I found a used Delta 36-820 nearby and it appears to be in great shape. It comes with a Biesemeyer fence system as well as the Biesemeyer T-Square 78-960 blade guard.It was bought new in 1997 and doesn’t appear to have been abused especially after talking to the owner. Was wondering about the reliability, maintenience and u...

12-19-2013 01:06 PM

Coasters - 7 replies

I just couldn’t help myself and if I copied somebody elses pattern, my apologies.I had some oak and walnut that was in the way, so instead of tossing it I glued it. They are just under 4” square so as to keep waste to a minimum while making the carriers.I used a forstner bit to open the front and then bandsaw to remove the excess. ...

12-19-2013 12:58 PM

Oak Night Stand - 0 replies

Ask what they want for Christmas and they will tell you so I asked and this is the result of one request. It’s a night stand made to dimensions to fit in a given area and height. I had on hand a finished 5/4 oak board that was 8” wide but it already had a dark finish on it. The planer took care of that and still end...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com