LumberJocks

old wooden vise

  • Advertise with us

« back to Hand Tools forum

Forum topic by qajaq06 posted 04-30-2017 11:06 PM 426 views 0 times favorited 5 replies Add to Favorites Watch
View qajaq06's profile

qajaq06

2 posts in 420 days


04-30-2017 11:06 PM

Hi all,

I have two of this vise style and was hoping to make new wooden jaws, but it may be impossible to get the hardware apart. Is the sleeve on the handle side attached to the spindle by a screw which has then been hammered flat, or is this a rivet? I tried pounding it out from below but it didn’t move. I could add a metal plate to spread the load and surround the old jaw with a new jaw but it may not be worth it. Thoughts?


5 replies so far

View Blake Haskins 's profile

Blake Haskins

206 posts in 994 days


#1 posted 05-01-2017 02:38 PM

maybe rather than hammering it, tap and rive a hole in it, make the vise stationary and put a lever on the exposed screw, I don’t know just an idea. I wouldn’t cover up the old jaw if you cant get it off.

-- make sure you subscribe to my channel- https://www.youtube.com/channel/UCRuWi7P7eIcNOckoxBI-ZRA

View Smitty_Cabinetshop's profile (online now)

Smitty_Cabinetshop

14652 posts in 2374 days


#2 posted 05-01-2017 03:17 PM

Could there be something in between those sandwiched pieces of wood that holds everything together? In other words, what is between the beveled piece vs. the thicker chop? I’d (carefully) pry those apart if they’re nailed, removed the screws if they’re screwed, and go from there.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View Don W's profile

Don W

18453 posts in 2324 days


#3 posted 05-01-2017 10:35 PM

I agree with Smitty. That’s two piece for a reason.

-- http://timetestedtools.net - Collecting is an investment in the past, and the future.

View Loren's profile

Loren

9302 posts in 3404 days


#4 posted 05-01-2017 11:35 PM

I think you have half a vise. The other half would
be the guide rods and a nut for that threaded
shaft at the end of them.

View TheFridge's profile (online now)

TheFridge

7745 posts in 1242 days


#5 posted 05-02-2017 12:12 AM

If the threads stop before the chop then that might be a sign as well.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com