LumberJocks

how cold is your shop?

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by Charlie H. posted 02-13-2018 05:27 PM 326 views 0 times favorited 10 replies Add to Favorites Watch
View Charlie H.'s profile

Charlie H.

181 posts in 650 days


02-13-2018 05:27 PM

I know some of you will laugh at this warm weather weenie, but the temperatures have been in the 20’s-40’s and the workshop (garage) has been staying below 50*.
What workshop temperature do y’all think is too cold for woodworking?

-- Regards, Charlie --------I talk to myself, because sometimes I need expert advice.---------


10 replies so far

View Ron Aylor's profile

Ron Aylor

2609 posts in 648 days


#1 posted 02-13-2018 05:50 PM

I have no electricity in my shop … so, below 28° and I have to stay out!

-- Ron in Lilburn, Georgia.  Knowing how to use a tool is more important than the tool in and of itself.

View JCamp's profile

JCamp

566 posts in 551 days


#2 posted 02-13-2018 05:51 PM

Entirely depends on how bad I want out of the house LOL

-- Whatsoever thy hand findeth to do, do it with all thy might

View ArtMann's profile

ArtMann

942 posts in 816 days


#3 posted 02-13-2018 05:54 PM

My shop is heated but I will work out there without it when the temperature is above 55 or so. The work keeps me warm.

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

15353 posts in 2619 days


#4 posted 02-13-2018 05:58 PM

30 degrees is too cold. 50 degrees works, but only when I know the heater’s been turned up a bit and things will get a little warmer. 60 degrees in winter is right on the mark for me.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View LesB's profile

LesB

1730 posts in 3443 days


#5 posted 02-13-2018 06:20 PM

Below 50 degrees my hands get too cold to work for very long.
Also glue will not set at those temperatures and finishes will not dry/cure.

-- Les B, Oregon

View LittleShaver's profile

LittleShaver

321 posts in 620 days


#6 posted 02-13-2018 07:13 PM

Needs to be 50 or better in the shop for comfort and drying/curing.

-- Sawdust Maker

View jimintx's profile

jimintx

791 posts in 1585 days


#7 posted 02-13-2018 07:46 PM

I would not be happy at 50 or below.

In Houston it isn’t too tough to achieve a nice winter temp of anywhere from 60 to 70 degrees. I do it in a 21’ x 21’ space with just one or two cheap little electric place heaters.

I am equally concerned about keeping the humidity down. Some days I only run a dehumidifier in there.

It’s a much bigger challenge, or cost anyway, to keep it cool enough throughout the other 10 months of the year!

-- Jim, Houston, TX

View papared's profile

papared

4 posts in 107 days


#8 posted 02-13-2018 08:29 PM

I keep my mini-split around 65* in the winter. I like it where I can wear a heavy weight tee shirt with my work apron and be comfortable.

Red

-- Papa Red

View Charlie H.'s profile

Charlie H.

181 posts in 650 days


#9 posted 02-13-2018 09:36 PM

Thanks for the feedback.
@ 50 my hands are cold enough my fingers seem to slide on the wood and I don’t trust my grip.
Seems like that’s common.
Since I am in Dallas by next month I will probably be wondering how hot y’all can stand it to be.

-- Regards, Charlie --------I talk to myself, because sometimes I need expert advice.---------

View olegrump's profile

olegrump

51 posts in 223 days


#10 posted 02-15-2018 03:15 PM

Gotta be at least 50 degrees. Otherwise it’s too cold for me to do any work and “The Boss” will give me Hell for even going out there.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com