LumberJocks

Hollow table leg

  • Advertise with us

« back to Woodworking Skill Share forum

Forum topic by Gareth Jordaan posted 06-14-2018 04:59 PM 381 views 0 times favorited 5 replies Add to Favorites Watch
View Gareth Jordaan's profile

Gareth Jordaan

1 post in 126 days


06-14-2018 04:59 PM

Topic tags/keywords: question pine

Hello All
I have been asked to make this leg for the dining room table I am making for my customer. The customer has asked because of his budget, that I must Not make these legs out of a solid block of wood. He wants to save money by me making these legs look like they were cut out of a solid block of wood. If this was a square leg, it would be easy, but because of the shape, I am stumped. Has anybody done anything like this before? Please advise? Thank you in advance!


5 replies so far

View Loren's profile

Loren

10477 posts in 3792 days


#1 posted 06-14-2018 05:06 PM

Save the customer money by making a leg shape
you know how to make efficiently.

People on here have inquired many times about
this general style of pedestal leg and I’ve never
seen a quick & easy solution proposed. You’ll
have to remove the waste, refine the shape with
hand tools and do a lot of sanding.

View johnstoneb's profile

johnstoneb

3013 posts in 2317 days


#2 posted 06-14-2018 05:34 PM

Glue up blocks from const. grade lumber. Shape it then veneer it.

-- Bruce, Boise, ID

View bondogaposis's profile

bondogaposis

4988 posts in 2495 days


#3 posted 06-14-2018 05:37 PM

You can see from the picture that the leg is glued up from several pieces of pine at least three that I can see. Do you have a bandsaw that has the capacity to cut the leg? If so it is pretty straight forward. Laminate a block of wood sufficient size, square it up. Then cut the profile for the main part on 2 adjacent sides, save the waste and use double sided tape to tape the waste back in place then cut the opposite sides to match other sides. Then begin sanding and sanding and sanding. I would not attempt to make it hollow, any savings in cheap pine would be eaten up by greatly increasing the labor and time to make it.

-- Bondo Gaposis

View JADobson's profile

JADobson

1203 posts in 2255 days


#4 posted 06-14-2018 07:10 PM


I would not attempt to make it hollow, any savings in cheap pine would be eaten up by greatly increasing the labor and time to make it.

- bondogaposis

+1 customer seems to think that material costs are an easy place to save money. Not true. Your time is what adds up the fastest and making it hollow is going to take a lot longer.

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

View AlaskaGuy's profile (online now)

AlaskaGuy

4493 posts in 2453 days


#5 posted 06-14-2018 09:36 PM

Not your exact leg but may give you some ideas on building such a leg.

https://youtu.be/dyqq9pQ7kHg

I wish I could buy a Cadalic for the price of a VW.

-- Alaskan's for Global warming!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com