LumberJocks

Clear Coat on top of Alkyd Enamel Paint - Wood Bat

  • Advertise with us

« back to Finishing forum

Forum topic by Saucerito posted 06-14-2018 05:23 PM 747 views 0 times favorited 4 replies Add to Favorites Watch
View Saucerito's profile

Saucerito

19 posts in 899 days


06-14-2018 05:23 PM

Hi,

I would like to know which clear coat (if any) should be used on top of an alkyd enamel paint on a wood baseball bat. I plan to paint the barrel and stain the handle, and I would like to have a clear coat over the stain and paint. I would like a clear coat over the enamel to prevent the paint from marking up the ball or chipping. Do you think these are valid concerns with an alkyd enamel paint such as Rust-Oleum Professional Enamel Spray Paint or can I leave this without a clear coat? I would also like a clear coat over the stained handle to slow down moisture ingress and to provide some protection for the wood.

I’ve made a few bats that I have stained and finished with wipe on poly. These look good and seem to be holding up well. Other than slight yellowing, how would the poly work on top of the paint?

Also, are there any other suggestions for a reasonably priced paint that will be durable and have a smooth, gloss finish?

Thanks, Will


4 replies so far

View DBDesigns's profile

DBDesigns

31 posts in 22 days


#1 posted 06-14-2018 05:30 PM

Will,
I noticed the same problem of yellowing when I tried to clear coat a set of beanbag boards with stickers on them. I would be interested to find out what “clear coat” is really clear on top of whit paint. As far as what finish to use, if you are spaying on oil based paint like Rust-Oleum, you have to use an oil based product on top of it or you will end up with a mess.

-- Deadbeat Designs

View Saucerito's profile

Saucerito

19 posts in 899 days


#2 posted 06-14-2018 05:39 PM

Since I’ll be painting the barrel black, I would expect that the yellowing wouldn’t be a concern, and the ambering of the stain would be a benefit.

There are paint clear coats, but I’d imagine that wouldn’t work too well on the stained area without a primer.

View John Smith's profile

John Smith

999 posts in 187 days


#3 posted 06-14-2018 09:59 PM


if you really think that a clear coat is required.

if you think about it, enamel paint alone far outlasts clear coats
as the clear needs maintenance every year or two to stay viable.

.

-- Graduated Valedictorian from the University of HardKnocks --

View Saucerito's profile

Saucerito

19 posts in 899 days


#4 posted 06-15-2018 04:03 AM

John,

You’re right. The more I’ve researched the enamel paint, the more I’ve realized there’s not really a need for a clear coat. I think I’ll just apply the wipe-on poly to the stained handle and put a thin vinyl stripe around the point where the paint and poly meet. Something like the pictures below.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com